Description
MEASUREMENTS (In Inches)
Length From centre front neck to hem 11″
Width at Waist Top edge of apron, edge to edge 23″
Pocket Height Top edge of pocket to hem edge 7 1/2″
Right Pocket Width Top edge of pocket, bartack to bartack 7 1/2″
Pencil Pocket Width Top edge of pocket, bartack to bartack 7/8″
Centre Pocket Width Top edge of pocket, bartack to bartack 6″
Left Pocket Width Top edge of pocket, bartack to bartack 6 1/2″
DECORATING INSTRUCTIONS FOR TREATED FABRIC APRONS
Given our aprons are made from treated fabric to offer best performance; here are some tips to effectively decorate our aprons:
Embroidery
This is a good decoration option for the aprons. The needle size and the embroidery backing material will determine best appearance of the design/artwork, with no special requirements to add this type of decoration.
Screen Printing
To improve adherence to the treated cotton twill fabric, we suggest to consult your ink supplier for suggestions on ink additives such as bonding agent for plastisol inks or binder/fixer for water base inks. We recommend using dryer temperature in range of 320-330º F (160-166º C) for plastisol inks. In mindfulness that water-based ink is more difficult to cure than plastisol ink, it is important to maintain temperature until all the water is removed. Please consult your ink supplier for dryer temperature recommendations when using the water base inks on cotton twill fabrics. • A white base blocker on dark colours are recommended. Please consult your ink supplier for more information.
Heat Transfers
While heat transfers can be applied to the treated fabric, adherence after multiple use will not be as stable as plastisol inks. Check with your heat transfer supplier/technician to determine if any additive or bonding agent is available to improve stability of heat transfer design for long term use.
DTG (Direct To Garment) Printing
DTG inks share similar properties as water-base inks and may require an ink additive, undercoat or transfer application to best adhere to Cotton Canvas type fabrics. Check with your DTG supplier/technician for recommendations on additives to improve stability for long term use.